Inconel 600 601 625 718 Rod for Automotive Fasteners

Basic Info

Model NO.	Inconel 600
Sample	Free
Delivery Time	5-15days
Name	Inconel 600 Wire
Surface	Bright
Criterion	ASTM Aws
Diameter	0.02-5.0mm
OEM	Yes
Transport Package	Wooden Case
Specification	0.02-5.0mm
Trademark	HUONA
Origin	Shanghai, China
HS Code	7505220000
Production Capacity	2000 Tons/Year

Product Description

Inconel 600 601 625 718 Rod For Automotive fasteners

General Description
Inconel 600 is a nickel-chromium alloy with excellent resistance to organic acids and is used extensively in fatty acid processing. The high nickel content of Inconel 600 provides good resistance to corrosion under reducing conditions, and its chromium content, resistance under oxidizing conditions. The alloy is virtually immune to chloride stress-corrosion cracking. It is also employed widely in the production and handling of caustic soda and alkali chemicals. Alloy 600 is also an excellent material for high-temperature applications requiring a combination of heat and corrosion resistance. The excellent performance of the alloy in hot halogen environments makes it a popular choice for organic chlorination processes. Alloy 600 also resists oxidation, carburization, and nitridation.
In production of titanium dioxide by chloride routes natural titanium oxide (illmenite or rutile) and hot chlorine gases reacted to produce titanium tetrachloride. Alloy 600 has been successfully used in this process due to its excellent resistance to corrosion by hot chlorine gas. This alloy has found wide usage in the furnace and heat-treating field due to its excellent resistance to oxidation and scaling at 980°C. The alloy also has found considerable use in handling water environments, where stainless steels have failed by cracking. It has been used in a number of including steam generator boiling and primary water piping systems.
Other typical applications are chemical processing vessels and piping, heat treating equipment, aircraft engine and airframe components, electronic parts, and
Chemical Composition

Grade	Ni%	Mn%	Fe%	Si%	Cr%	C%	Cu%	S%
Inconel 600	Min 72.0	Max 1.0	6.0-10.0	Max 0.50	14-17	Max 0.15	Max 0.50	Max 0.015

Specifications

Grade	British Standard	Werkstoff Nr.	UNS
Inconel 600	BS 3075 (NA14)	2.4816	N06600

Physical Properties

Grade	Density	Melting Point
Inconel 600	8.47 g/cm3	1370°C-1413 °C

Mechanical Properties

Inconel 600	Tensile Strength	Yield Strength	Elongation	Brinell Hardness (HB)
Annealing Treatment	550 N/mm²	240 N/mm²	30%	≤195
Solution Treatment	500 N/mm²	180 N/mm²	35%	≤185

Our Production Standard

	Bar	Forging	Pipe	Sheet/Strip	Wire	Fittings
ASTM	ASTM B166	ASTM B564	ASTM B167/B163/B516/B517	AMS B168	ASTM B166	ASTM B366

Welding of Inconel 600
Any traditional welding procedures can be used to weld Inconel 600 to similar alloys or other metals. Before welding, preheating is needed and also any stain, dust or mark should be cleared by steel wire brush. About 25mm width to welding edge of base metal should be polished to bright.
Recommend filler wire regarding welding Inconel 600: ERNiCr-3
Size Range
Inconel 600 wire, bar, rod, forging, plate, sheet, tube, fastener and other standard forms are available.